• Hey Guest, you may be unaware of our Patreon. If you want to give us some support please head on over and sign up. If you get God Tier you don't even receive ads anymore!

    https://www.patreon.com/concordiagaming

  • Hey Guest, you may be unaware of our steam group. You should join it to receive new information about events etc. on the server!

    http://steamcommunity.com/groups/concordiagaming

    Note: Do not use the Steam group to rant about your ban or to ask to be unbanned. It won't make your situation any better.

Homemade magnetic pulse device for Nanobot project

Status
Not open for further replies.

Dunken

Well-Known
Member
ITEM RESEARCH, USAGE, AND CONTAINMENT FILES
CONFIDENTIAL - DO NOT COPY
IRUC/GAMMA EYES ONLY

All tests that are not involving a project are to be logged using this format from now on.
1. Conducted by: Dr. Dunken

2. Anomalies Involved: none

3. Operatives involved: N/A

4. Items or materials involved: 1x copper wire, 1x high voltage battery, 1x plastic casing, 1x plastic button

5. What test were you conducting and why?: The goal was to create a homemade magnetic pulse device for the purposes of disrupting the nanobot replication process

6. List all precautions you took during the test: Wore rubber gloves to prevent me from getting shocked

7. List everything that happened during the test (Recorded in hours):

NOTE:
I am just logging the steps, the process took me about a half hour

1. place all the materials on the big table in the lab.
2. Open the plastic casing.
3. Place the high voltage batter inside, and secured it firmly into the casing.
4. Take the copper wire, coil it on one end of the outside of the plastic container. Then run the wire in the casing to connect it to the batter, creating a circuit.
5. Cut a small section of wire from the coil, so that it will create an arc when activated. (Similar to a makeshift taser but not quite the same, as the arc is not focused onto a single point.
6. Connected the battery so that it would complete the circuit when pushed.
7. Sealed and closed the container with duct tape.

8. Conclusion: (List all findings or additional notes here): The device works properly. It has the capacity to turn off devices such as cell phones and electronic sights from weapons.

NOTE: This was made for further testing with nanobots.
 

Nic or Treat

Founder
Staff member
Founder
Board of Directors
DVL
This should have been part of the overall nanobot project as a step.

-Toboggan
 
Status
Not open for further replies.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top